Power Fist 8046241 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 15

Power Fist 8046241 Скачать руководство пользователя страница 14

3.

Push spindle lock button in while rotating the arbor nut onto shaft in a
clockwise direction. Lock the arbor nut in place by using the pin spanner (as
shown.)

Important:

Proper balance is essential for proper grinding

For removal of paint/rust etc: We recommend using a coarse wheel (30-36
grain)
For finishing surfaces: we recommend using a finer grain wheel (40-80 grain)

Router Attachment

Follow the steps 1-8 (changing attachments) from above to install the router
attachment. You can only operate the router in the forward direction. The
direction control defaults to this position once the router is attached.

Prior to use:

• Make sure the router attachment is properly attached and secure.
• Make sure the direction switch is in the locked (middle) position and not the

reverse position.

Note:

this will damage the power tool.

• Remove battery before changing any parts or the attachment.

Warning: Never operate the router without
using ANSI or CSA approved eye
protection glasses.

Direction Control: > Forward Only

Installing grinding wheel

Attaching arbor nut Securing grinding wheel

Router

Head

Silver

Button

Screw

Screw

Bracket

Collet Screw

«
...
12
13
14
15
»

Содержание 8046241
















Отзывы:

Нет отзывов