5 Gallon Siphon-Fed Abrasive Blaster
9
Visit www.princessauto.com for more information
8012660
V 3.02
TROUBLE SHOOTING
Problem
Possible Cause(s)
Suggested Solution(s)
Excessive dust
while blasting.
1. Abrasive media may be worn.
1. Replace the abrasive media.
2. Too much abrasive media in
the hopper.
2. Remove excess abrasive media.
3. Loose air line or
fitting connection.
3. Tighten the fitting and make sure
the air lines are secure.
Uneven blasting action. 1. Too much abrasive media in
the hopper.
1. Remove excess abrasive.
2. Moisture is present inside
the cabinet.
2. Check the air line to make sure that
there is no moisture in it.
Inadequate speed or
inefficiency of blast.
1. Abrasive media may be worn.
1. Replace the abrasive media.
2. Pressure is too low.
2. Increase the inlet pressure.
WARNING! Do not exceed the
maximum pressure of 125 PSI.
3. Worn nozzle.
3. Replace the nozzle.
