Storage
The pressure washer should be stored in a frost-free environment.
After long-term storage without operation, water scales may form inside the machine,
making it hard to start again. In such conditions it is recommended to turn off and
disconnect the power supply and rotate the motor by hand several times so as to avoid
excessive current draw on the motor and the power supply (fig 4).
Attaching soap dispenser bottle
Insert metal end of the spray lance into the opening of spray gun (making sure to match
the locking tabs on either side of the spray lance to the notches of the spray gun), Push
in and twist in a clockwise motion to lock spray lance and spray gun together (make
sure there is a tight and secure fitting between both). Insert end of soap dispenser bottle
with the plastic locking tabs into opening of the spray lance. Push in, turn, and lock so
the soap dispenser bottle and spray lance are secure.
Technical Specifications
Model:
5005680
Working pressure:
1,300 PSI
Working flow rate:
1.6 GPM
Rated electrical current:
13 A
Power Supply Voltage:
120 V / 60Hz
Motor Rotation Speed:
3,400 RPM
Max Water Temperature: 122°F
Max pressure inlet water: 58 PSI
Hose Length:
20 ft
Weight:
28-1/2 lbs
Dimensions:
19-1/2" x 12-1/4" x 10-1/2"
