5770096
1/4 HP Submersible Utility Pump
V4.0
6
For technical questions call 1-800-665-8685
a. Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b. Do not use any adapter plugs.
7. This tool is only for use on 120 V (single phase) and is equipped with a
three-prong grounded power supply cord and plug.
8. DO NOT use this device with a two-prong wall receptacle.
a. Choose an available three-prong power outlet.
b. Replace 2 prong outlet with a grounded 3-prong receptacle, installed
in accordance with the CE Code and local codes and ordinances.
WARNING! All wiring should be performed by a qualified electrician.
POWER CORD
1. Insert the power cord plug directly to the power supply whenever possible.
Use extension cords or surge protectors only when the tool's power cord
cannot reach a power supply from the work area.
a. When operating a tool outside, use an outdoor extension cord marked
W-A or W. These cords are rated for outdoor use and reduce the risk
of electric shock. They are constructed of more durable materials and
can withstand temperature changes, UV light (sunlight) and moisture.
b. Use in conjunction with a Ground Fault Circuit Interrupter (GFCI). If
operating a tool in a damp location is unavoidable, the use of a GFCI
reduces the risk of electric shock. It is recommended that the GFCI
should have a rated residual current of 30 mA or less.
2. Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
a. Inspect the tool's power cord for cracks, fraying or other faults in the
insulation or plug before each use.
b. Discontinue use if a power cord feels more than comfortably warm
while operating the tool.
c. Have the power cord replaced by a qualified service technician.
