Operating Instructions
Slide On-Off Switch with Lock
• The switch can be locked in the “on” position, a convenience for
long grinding operations.
• To operate the grinder without locking it on, press the switch
button forward to the “on” position. When you release pressure on
the switch, the button will switch to the “off” position
automatically
• To lock the switch on, press the switch button forward and press
the lock button. To unlock the switch, simply press and release the
lock button. The switch is spring loaded and will snap back
automatically.
Warning:
Hold the tool with both hands when starting it, as torque
from the motor can cause the tool to twist.
• Start the tool before applying it to work. Lift the tool from the
work before releasing the switch. Do not turn the switch on and
off while the tool is under load; this will greatly decrease the
switch life.
Side Handle
• The side handle used to guide and balance the tool can be
threaded into the front housing on either side of the tool,
depending on personal preference and comfort. Use the side
handle for safe control and ease of operation.
Wheel Guard
• Always attach the wheel guard for grinding operations. Attach it
with the provided fasteners.
Lock Nut and Backing Flange
• Your tool is equipped with a threaded spindle for mounting
accessories. Always use the supplied lock nut (and backing flange)
that has the same thread size as the spindle.
