Power Electronics NB WALL ADVANCED, Руководство по аппаратному обеспечению и установке

Страница: 23 / 54

POWER ELECTRONICS NB Wall
HANDLING AND TRANSPORTATION
21
EN
HANDLING AND TRANSPORTATION
CAUTION
Please read the following transport and installation instructions carefully.
Failure to follow the transport and installation instructions could result in damage to the equipment or
injury to persons.
Reception
The equipment is delivered perfectly packed and checked. Upon receipt, inspect the equipment. In the
event of damage to the equipment, notify the logistics agent and Power Electronics 902 40 20 70,
(Interna34 96 136 65 57), or your nearest agent within 24 hours of receipt. Verify that the goods
received correspond to the delivery note, models and serial numbers.
Storage
The equipment must be stored in a location that avoids direct solar radiation, which has an ambient
temperature between -40°C y +60°C and a relative humidity <90% without condensation.
Whenever possible, the equipment should be unloaded at its place of installation and operation and it
must be kept in its original packaging.
If it is necessary to store the equipment, the instructions given below must be followed to keep the charger
in proper condition until the time of installation:
•
The equipment must be stored in a protected location that avoids excess moisture (inside and
outside the equipment) and direct solar radiation.
•
Store the equipment on a flat, level surface.
•
Keep the covers on during storage.
•
Store the equipment away from chemicals or corrosive gases.
•
Keep the equipment packed until the time of installation.
Unpackaging
During the unpackaging, remove carefully the packaging (do not use sharp tools). After removing the
packaging, check the material inside. If you receive replacement parts with the product, please separate
and store it in a safe place. It should not be exposed to vibrations, falls or moisture.
4