safety instructions
Electrical safety
When using electric machines always observe the safety regulations applicable
in your country to reduce the risk of fire, electric shock and personal injury.
read the following safety instructions and also the enclosed safety instructions.
Always check that the power supply corresponds to the voltage on the
rating plate.
Class II machine – Double insulation.
Replacing cables or plugs
Immediately throw away old cables or plugs when they have been replaced by
new ones. It is dangerous to insert the plug of a loose cable in the wall outlet.
Using extension cables
only use an approved extension cable suitable for the power input of the
machine. The minimum conductor size is 1.5 mm
2
. When using a cable reel
always unwind the reel completely.
Mains plug replacement
If the moulded 3-pin plug attached to the unit is damaged and needs
replacing, it is important that it is correctly destroyed and replaced by an
approved bS 1363 fused plug and that the following wiring instructions are
followed.
The wires in the mains cable are coloured in accordance with the following
code:
blue neutral
brown live
As the colours of the wires in the mains cable of the unit may not correspond
to the coloured markings identifying the terminals in the plug, proceed as
follows:
- The wire which is coloured blue must be connected to the terminal which is
marked with the letter n or coloured black.
- The wire which is coloured brown must be connected to the terminal which is
marked with the letter l or coloured red.
UK Helpline 02035-142281 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PTS-280
9
DSM6045 Ma-GB-IRE 1104-13.indd 9
4/13/11 11:49:35 AM
