safety instructions
4) Power tool use and care
a. do not force the power tool. use the correct power tool for your applica-
tion. The correct power tool will do the job better and safer at the rate for
which it was designed.
b. do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c. disconnect the plug from the power source before making any adjust-
ments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow per-
sons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power
tools operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g. use the power tool, accessories and tool bits etc. in accordance with these
instructions and in the manner intended for the particular type of po-
wer tool, taking into account the working conditions and the work to be
performed. use of the power tool for operations different from intended
could result in hazardous situation.
h. do not leave power tools unattended while they are switched on. Always
switch off the tool and wait until it has come to a full standstill before
leaving.
i. If the mains cable has been damaged, it must be replaced with a spe-
cial mains cable. These can be obtained from the manufacturer or the
manufacturer’s customer service department. The mains cable may only
be replaced by the manufacturer, the manufacturer’s customer service
department or equally qualified persons.
5) Service
a. Please use a qualified expert who uses original replacement parts to repair
your power tool. This will ensure proper functioning of the power tool.
b. Caution! The use of any accessories or additional tools other than those
recommended in this manual may lead to an increased risk of injury. only
use original replacement parts.
UK Helpline 02035-142281 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PTS-280
8
DSM6045 Ma-GB-IRE 1104-13.indd 8
4/13/11 11:49:35 AM