Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model number: PS-750L
19
Let the jigsaw do the work. Do not press too hard on the jigsaw.
Parallel saw guide
Fig. 8
If you want to make a saw cut that runs parallel to the edge of the plank, use
the parallel saw guide supplied. You do this as follows:
•
Loosen the screws on the front of the bottom plate.
•
Slide the parallel saw guide through the openings at the side of the
bottom plate.
•
Determine the distance between the saw cut and the side of the
workpiece.
•
Secure the guide at this distance with the socket head screws.
If the required distance between saw cut and side is 5 cm, set the
indicator ‘5’ on the guide exactly above the saw blade.
•
Tighten the screws again.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model number: PS-750L
06
Safety instructions
The following symbols are used in these instructions:
Read the instructions carefully.
Conformity with the relevant EU safety directives.
Class II machine - double insulation - earth connection not required.
Danger of life and risk of injury as well as risk of damage to the
machine in case of non-adherence to the safety instructions in
these instructions of use.
Danger of electric shock.
Remove the plug from the mains socket.
Caution! Laser beam! Never look into the beam and never aim the
laser at a person when it is switched on.
Wear a dust mask. Working with wood, metals and other materials
may produce dust that is harmful to health. Do not work with
material containing asbestos.
Hard materials such as steel, aluminium, plastic.
Soft materials such as wood.
Accuracy.
Faulty and/or discarded electrical or electronic apparatus have to
be collected at the appropriate recycling locations.
Operation
