background image

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626

Web Support: www.servotool.eu

Model Number: PGG-800   

 

 

 

 

9

Safety instructions

•  Do not operate the generator near water.
•  Never connect two generators together.
•  Never connect the generator to any commercial power outlet.
•  Make sure any extension cords used are in a safe condition and of 

sufficient capacity for the task.

•  Ensure that the load on the generator falls within its capacity as 

specified in the table before plugging in any cords.

Fire and burn hazards

•  The exhaust system gets hot enough to ignite some materials:

-  keep the generator at least 1 meter away from buildings and other 

equipment during operation.

-  keep flammable materials away from the generator.

•  The exhaust becomes very hot during operations and remains hot for a 

while after stopping the engine:

-  Let the engine cool before storing the generator indoors.
-  Do not touch the hot exhaust with your hands.

•  Gasoline is extremely flammable and is explosive under certain 

conditions. Do not smoke or allow flames or sparks where the generator 
is refueled or where gasoline is stored.

•  Fuel vapors are extremely flammable and may ignite after the engine 

has started. Make sure that any spilled fuel has been wiped up before 
starting the generator.

•  Never shade the generator with clothes or other articles.

PGM6002 Ma GB-IRE-1101-17.indd   9

1/18/11   3:35:38 PM

Содержание PGG-800





















Отзывы: