UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
12
Model Number: PGG-800
Periodic maintenance
Periodic maintenance
Daily (pre-operation check)
• Check fuel hose for cracks or other damage. Replace if necessary.
• Check exhaust-system for leakage. Retighten or replace gasket if
necessary.
• Check choke operation.
• Check recoil starter operation.
3 Months or 50 hrs
• Check condition of spark plug. Adjust gap and clean. Replace if
necessary.
6 Months or 100 hrs
• Clean fuel tap and fuel tank filter. Replace if necessary.
• Check fittings and fasteners. Replace if necessary.
12 Months or 300 hrs
• Contact a specialized service centre to check the valve clearance.
• Check the fan of the cooling system for damage.
Spark plug inspection
Fig. 2
• Disconnect the spark plug cap, and remove any dirt from around the
spark plug area.
• Remove spark plug (10) with the plug spanner supplied.
• Inspect the spark plug. It should be a tan colour.
• Measure the gap (distance contact point) with a suitable gauge. The
gap should be 0,7 - 0,8 mm. Correct the gap, if necessary, by carefully
bending the side electrode.
• Replace the spark plug if the electrodes are worn, or if the insulator is
cracked or chipped.
• Install the spark plug carefully, by hand, to avoid cross-threading.
• Place the spark plug with correct torque: 20 Nm.
• Attach the spark plug cap.
Exhaust screen
• Wait for exhaust to cool.
• Exhaust screen may be blocked up with carbon deposits.
• Undo the screw cap and remove the exhaust screen.
PGM6002 Ma GB-IRE-1101-17.indd 12
1/18/11 3:35:38 PM
