Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100
07
Safety instructions
General Safety Instructions
Attention!
When using electric machines always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock and
personal injury. Read the following safety instructions and also the enclosed
safety instructions.
Keep these instructions in a safe place!
1.
Keep work area clear.
Cluttered areas and benches invite injuries.
2.
Consider work area environment.
Do not expose power tools to rain. Do not use power tools in damp or
wet locations. Keep work area well lit. Do not use power tools in
presence of flammable liquids or gases.
3.
Guard against electric shock.
Prevent body contact with grounded surfaces (e.g. pipes, radiators,
refrigerators).
4.
Keep visitors away.
Visitors should be kept away from the work area at all times. Do not let
visitors handle the machine at any time.
5.
Store unused tools.
When not in use keep tools out of reach of children. Store in a dry and
secure location.
6.
Do not force tool.
Do not apply undue pressure as this may affect performance and may
cause damage to the machine. Forcing the job also increases the
potential for accidents.
7.
Use right tool.
Do not force small tools or attachments to do the job of heavy duty tool.
Do not use a tool for purposes not intended.
8.
Dress properly.
Do not wear loose clothing or Jewellery. They can be caught in moving
parts. Rubber gloves and nonskid footwear are recommended when
working outdoors. Wear protective hair covering to contain long hair.
9.
Use safety glasses.
Also use face or dust mask when operation is dusty. Use ear protection.
10. Connect dust extraction equipment
If devices are provided for the connection of dust extraction and
collection facilities ensure these are connected and properly used.
11. Do not abuse cord.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100
14
Operation
Starting the machine
•
Clamp the workpiece and make sure that the workpiece cannot slide
from under the machine during the cutting activities.
•
When working with the machine, always hold it firmly with both hands
and provide for a secure stance.
•
Always direct the cable to the rear of the machine.
•
Insert the mains plug only when the machine is switched off.
•
Apply the machine to the workpiece only when switched on
Never use the machine for grinding magnesium workpieces.
Switching on and off
•
This machine is equipped with a safety switch.
•
Press lock-off switch to engage start switch.
Before starting work, the machine must be run at the max. speed.
Operation
Fig. 7
Fig. 8
30 - 40
o