background image

5

Safety Instructions

The operation of the device in hazardous locations is not admissible.
Please comply with the corresponding safety instructions if you use the appliance in danger
areas (e.g. filling stations).
Do not turn on the appliance if the power supply cable or important components of the
appliance, such as safety components, high-pressure hoses, spray jet, are damaged.
Warning: High-pressure hoses, fittings, and couplings are of importance for the appliance
safety. Only use high-pressure hoses, fittings, and couplings recommended by the manu-
facturer.
The appliance must not be operated by children or non instructed persons.
The operator must use the appliance properly. He must take the local conditions into
consideration and must pay attention to third persons, in particular children, while working
with the appliance.
Warning: Do not use the appliance if third persons are within the reach of the appliance
unless such persons wear protective clothes.
Warning: High-pressure jets may be dangerous if they are used improperly.
The jet must not be directed at people, animals, active electrical equipment, or the appli-
ance itself.
Never direct the jet at yourself or third persons to clean clothes or shoes.
Never use the appliance to spray objects containing hazardous substances (e.g. asbestos).
Warning: Vehicle tyres/tyre valves may be damaged and burst by the high-pressure jet. A
first sign is the discoloration of the tyre. Damaged vehicle tyres/tyre valves are hazardous.
Always perform the cleaning with a minimum distance of 30 cm.
Cleaning operations during which oil saturated waste water is generated, such as engine
cleaning and underbody cleaning, may only be performed in cleaning locations that are
equipped with an oil separator.
If you clean varnished surfaces, please respect a minimum distance of 30 cm to avoid
damages.
Never take in solvent-containing liquids or undiluted acids and solvents! These include, for
example, benzene, paint thinner, or heating oil. The spray is highly inflammable, explosive,
and toxic. Do not use acetone, undiluted acids, and solvents as they affect the materials
used on the appliance.
If required, wear appropriate protective clothes and glasses to protect yourself from return
spray.
Never leave the appliance unattended as long as it turned on.
Warning: This appliance has been developed for the use of detergents that are supplied or
recommended by the manufacturer. The use of other detergents or chemicals may affect
the safety of the appliance.

Safety Devices
Safety devices are intended to ensure the protection from injuries and must not be modified or
circumvented.

Unit switch
The switch prevents unintented starting of the appliance. Stop the appliance during breaks or after
operation.

Safety Button
The safety button located on the trigger gun ensures that the appliance is not switched on inadvert-
ently.

Содержание High-pressure cleaner

















Отзывы: