16
ENGLISH
INSTRUCTION MANUAL
Maintenance
The carbon brushes must be checked regularly and
replaced if necessary.
Remove the carbon brush holder (3) and clean the
carbon brushes.
If these are worn, replace both brushes.
After changing the carbon brushes, the
multisander must be operated unloaded for 15
minutes.
Cleaning
Wipe the multisander using a well-wrung cloth
after use, and always keep the surface and
ventilation holes free of dirt.
Never use corrosive or abrasive detergents, as they
may affect the plastic parts on the multisander.
Rechargeable screwdriver
Technical specifications
Rechargeable screwdriver
Battery:
3.6 V
Speed:
250 rpm
Screwing/unscrewing
Chuck:
¼“ (6.35 mm)
Charger:
DC 5 V, 250 mA
Voltage/frequency:
230V ~ 50Hz
Rechargeable screwdriver parts
1. Chuck
2. Charger socket
3. Screwing button
4. Unscrewing button
5. Indicator light for charger
Charging
Attach the charger plug to the socket on the
rechargeable screwdriver (2).
The indicator light (5) will come on, and will only
go off when the charger is disconnected.
Screwing and unscrewing
Insert the required screwdriver bit into the chuck.
Press 3 to insert the screw, or press 4 to undo a
screw.
Cleaning
Wipe the rechargeable screwdriver using a well-
wrung cloth after use, and always keep the surface
and ventilation holes free of dirt.
Never use corrosive or abrasive detergents, as they
may affect the plastic parts on the rechargeable
screwdriver.
