22
• The Power Breezer unit was
designed with easy cleaning
in mind.
• Once a week drain the tank and
allow for the tank to dry out
overnight.
• If the inside of the tank becomes
slippery/slimy to the touch,
drain the unit. You can also clean
the tank by putting a few drops of
liquid soap in water and brushing
the inside of the tank with it.
Rinse the tank with a hose, then
open the drain at the bottom and
leave the lid off to allow to air dry.
• If mildew develops, you can flush the system out with a little bleach
(run the Power Breezer). Following the bleach treatment, flush the tank out
with clean water and let air dry.
2. Maintaining the water tank:
Maintenance
ENGLISH
7.
Power off
the unit.
8. Dispose of the diluted calcium and lime remover solution following de
calcification product manufacturer’s recommendation. Replace the
cleaning mixture with clean water and repeat steps 2 through 6 above to
flush the system with clean water.
WARNING:
Failure to flush the system with clean water will result in some
cleaning solution being atomized and blown out of the unit while in use.
9.
IMPORTANT:
After completing the rinse and powering off the unit,
UNPLUG the unit and wait 10 seconds. This is the ONLY way to exit the
cleaning mode.
WARNING:
If you encounter a unit in cleaning mode, flush with clean water
(return to step 7) prior using the system.
