6
Wiring Connections
Make sure you have good chassis ground. A good ground connection will eliminate most
electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s
metal chassis. The area around the ground connection should be clean, bare metal without rust,
paint, plastic, dust, or dirt for a good electrical connection.
Caution:
Do not interchange
the connection of the wiring!!!
For some car models you may
need to modify wiring of the
supplied power cord. Contact
your authorized car dealer
before installing this unit.
Using the ISO Connector
1. If your car is equipped with
the ISO connector, then
connect the ISO connectors
as illustrated.
2. For connections without the
ISO connectors, check the
wiring in the vehicle carefully
before connecting, incorrect
connection may cause
serious damage to this unit.
3. Cut the connector; connect
the colored leads of the power
cord to the car battery as
shown in the color code table
below for speaker and power
cable connections.
Location Function
Connector A
Connector B
1
Rear
Right(+)---Purple
2
Camera (12V DC)--Pink
Rear Right(-)---Purple/Black Stripe
3
Parking (GND)--Brown
Front Right(+)---Grey
4
Battery 12V (+)--Yellow
Front Right(-)---Grey/Black Stripe
5 Auto
Antenna--Blue
Front Left(+)---White
6
Front Left(-)---White/Black Stripe
7 ACC(+)--Red
Rear Left(+)---Green
8 Ground--Black
Rear Left(-)---Green/Black Stripe
