Adjustin the Para-Bass Controls
The bass response in a system is affected by four factors:
(1)
The acoustics of the vehicle
(2) The locations of the speakers
(3)The music on the tape
(4)
Speakers and speaker enclosures.
Because of the variations in the recording process, we developed BASS-1 Oto help
restore any low frequencies lost during the recording process, however, the acoustics
of various environments are different.
The
Sweep
control allows you to select a center frequency {the frequency most
affected) between 27 and 63 Hz. The
Width
control then allows you to control the shape
of the filter centered around the
Sweep
frequency.
Settin The Bass Out ut Control
The BASS-10 is the most powerful bass component. This device equipped with several
different Bass Output selections. If you should need to change the settings, Please use
the chart below for guidance. It is recommended : listen to the factory setting before
changing your Bass Output settings.
Recommended Settings
s.&Uin.9
Amg.!ifi.lr..1rul.uiJl2.!tag&
2.5Volt
3Volt
or less
5Volt
or
less
7.
5Volt
or less
5Volt
7.5Volt
10Volt
Oh My
G
os
h
11111111111111111
SPECIFICATIONS
Maximum Input Level
Maximum Output Level-
Frequency Response
Total Harmonic Distortion
Signal to Noise Ratio
Balanced Input Noise Rejection __
Input Impedance
Output Impedance _ __
- - - · ·
__
Power Supply
Power draw_
Recommend fuse rating -
10·
12·
15 Vrms
13.5V peak
10Hz-�1dB
0.003%
-130dB
>60dB
_ ____ _ _
10 Kohm
_ 1500hms
High headroom PWM
150mA
1 Amp