FUNCTIONS
THE OUTSIDE
BASS-I 0
DIGITAL BASS MACHINE
0
""""'°""
IJIPUT
DUT"UT
•1�111-..ND
DASH IMMOTt
1.
Inputs:
The inputs of The BASS-10 use a balanced input circuit to help minimize
induced noise. The are also designed to handle very high signal voltages up to 15
volts.
2.
Outputs:
These RCA connectors should be connected to the next component
after the BASS-10, such as a crossover, equalizer, or amplifier. Just remember, the
BASS-1
O
should go inline before a crossover.
3.
Dash Remote Control
4.
Power Connector
5.
Para-Bass Controls:
These 2 knobs control the Para-Bass functions of the
BASS-10. The SWEEP knob allows you to pick the centerfrequencythat you want
the BASS-1
O
bass restoration circuit to maximize. The WIDE knob adjusts how wide
of a frequency range the BASS-10 will effect.
6.
The PFM Subsonic Filter Switch:
The BASS-1
O
utilizers a PFM Subsonic Filter
Switch which will help with speaker control and amplifier power management. This
P FM Subsonic Fi
I
ter Switch comes with three frequencies selections 35Hz
I
50Hz
I
80Hz. On most systems, setting the switch at 33Hz is fine. If you want to protect your
speaker system even more, you should try a higher frequency. Often a higher frequency
actuallly sounds louder and cleaner.
7.
Bass Maximizer Indicator:
These three LED indicators flashes when the bass
maximization circuit is activated.
8.
Power On
LED.
