Powell RHS-40, Руководство пользователя

Страница: 4 / 8

2. Getting started
2.1. Safety Warnings
Have all operation, maintenance and servicing performed by qualified personnel only.
1. Read this operation manual completely before using the power supply.
2. Induction heating can be dangerous. Obey all warnings on unit and in manual.
3.
Do not touch live electrical parts. In operation, this means the output connectors,
the work coil, the work piece, and any buswork or cabling connecting them.
WARNING: These symbols, placed at the outputs of the power
supply, warn of the electric shock hazard there and RF burn
hazard at the outputs when the unit is operating.
Disconnect input power before installing or servicing this
unit.
Operation of this unit may be initiated at the power supply
without knowledge of service personnel.
2.2. Set-Up
The following is a list of steps describing the required actions to get the power supply set up.
1. Remove the fourteen ¼-20 screws from the cover and remove the cover.
2. Connect the heating coil to the output of the unit (see section
3.1. on page 5).
3. Connect and test the cooling water supply, as described in section 3.3. on page 6.
4. Load capacitors onto the capacitor bus as described in 4.1. on page 6.
5. Connect control wiring plug to power supply as described on 3.4 on page 6.
6. The unit is now ready for operation,.
4