1
Putting into operation
After the plugging of the device to the
power supply, blue LED diode lights up.
The device is operating correctly. The
electric signal inside the coil affects the
supermolecular structures of the treated
water and creates a large amount of crystal
centers of CaCO3 in the water and at the
same time prevents their depositing on the
surfaces of water network pipelines. The
crystal centers are washed away from the
water system through the outflow places.
Maintenance
The device does not require special
maintenance during its operation. In case
of failure (when the Blue LED diode is not
lit up) make sure that the device is
connected properly into the power supply
and check the connection of the two
cables. If the connection of the two cables
is ok and the blue LED diode still does not
light up, contact the seller who sold you
the device. From time to time check the
straps if they are fixed enough – if they get
loose, fix them again.
Technical parameters
Diameter of pipe: 3/8“ - 1”
Electric input: max 1 W
Power supply: 220 – 230 V, 50 – 60 Hz
IP code: IP 54
Dimensions (w x h x d): 90 mm x 60 mm x
30 mm
Weight: 0,350 kg
The length of the power cord: 1,6 m
The length of the cable for coils: 1,55 m +
1,55 m
Warranty on electrical function: 24
months
Working temperature: 0 – 40°C
Temperature of pipe: max 60°C
Content of delivery
1 pc of device, 2 pcs of anchors, 6 pcs of
straps, 1 pc connector, installation manual
