6
Fitting the Pedals
Pedals are marked L and R, for the left and
right hand side of the bicycle when it is
facing forward. Screw each pedal into the
appropriate pedal shaft by hand, and then
tighten with a spanner to secure.
The pedals have a reverse thread and
therefore need to be screwed in backwards.
Making the Electrical Connections
Join the electrical connectors
from the frame to those from
the battery housing.
Link the connections by
matching the wire colours
and clip shapes (see below).
NOTE – The battery will need to be
charged for this test to be carried out.
Turn the key in the battery
to turn the power on, then
twist the throttle (ensure the
back wheel is off the
ground). The back wheel
should rotate.
Test the lights by pressing the red button on the handlebar.
If the lights or the motor do not work then re check all connections.
Once you have checked that
the connections are correct,
tidy the wiring by easing it
into the gap in the frame,
taking care not to break the
connections.
