3
Assembly Instructions
Charge the Battery
Before assembling your PowaCycle, you should charge the battery.
This will allow you to test the electrical connections during assembly.
Remove the battery and charge it indoors. It may take up to 6 hours
to fully charge the battery. When charged, the LED turns from red to
green. Please note, the battery will deteriorate if it is left uncharged.
To release the battery turn the key in the
battery to the open position – key aligns
with symbol of a battery.
A lever under the seat releases a lock,
allowing the seat to be lifted forward on a
hinge, this makes the battery more
accessible.
Slide the battery from the base housing.
Open the cover on the battery socket and
connect the charger connection plug. Plug
the charger in to the mains supply and
switch on. Charge indoors away from water
and combustibles.
