Powabyke Powatryke, Руководство пользователя

Страница: 10 / 14

Version 07/06 10
19. Attach rear brake cable to lever (fig 31) and thread through frame clips to rear brake
cable clamp. Insert rear brake spring and then, pull cable taught and tighten (10mm).
Finish cable ends with clamped on aluminium caps (fig 32).
Note: put the tryke upright on these rear wheels to proceed.
20. Select gear 5 and thread gear cable through frame clips. Attach gear cable to frame
with 2 cable ties (fig 33). Secure wire through cable clamp (10mm) and finish cable
ends with clamped on aluminium caps (fig 34). Test Gear change movement and ajust
it if necessary by turning the adjustment nut located at the end of the cable (at the
derailleur side).
Note: put the tryke upright on these rear wheels to proceed.
Fig 32
Fig 31
Fig 34 Fig 33