background image

22

 Spray lubricant

 See “ENGINE” in Maintenance section.

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not 

cover items that have been subjected to 

operator abuse or negligence.  To receive 

full value from the war ranty, operator must 

maintain mower as instructed in this manual.

Some adjustments will need to be made 

periodically to properly maintain your unit.  

All adjustments in the Service and Adjust-

ments section of this manual should be 

checked at least once each season.

•  Once a year, replace the spark plug, 

clean or replace air filter element, and 

check blade for wear.  A new spark plug 

and clean/new air filter element assures 

proper air-fuel mixture and helps your 

en gine run better and last longer.

•  Follow the Maintenance Sched ule in this 

manual.

BEFORE EACH USE

•  Check engine oil level.

•  Check for loose fasteners.

LUBRICATION

Keep unit well lubricated

(See “LUBRICATION CHART”).

IMPORTANT:

  Do not oil or grease plastic 

wheel bearings.  Viscous lu bri cants will 

LUBRICATION CHART

attract dust and dirt that will short en the life 

of the self-lu bri cat ing bearings.  If you feel 

they must be lu bri cated, use only a dry, 

pow dered graphite type lubricant sparingly.

➀ 

Wheel 

adjuster (on 

each wheel)

 Engine oil

➀ 

Rear dis-

charge mower 

rear door 

hinge rod

➀ 

Handle bracket mounting pins

➀ 

Side dis-

charge mower 

deflector hinge 

rod

Check for Loose Fasteners

Clean / Inspect Grass Catcher *

Check Tires

Check Drive Wheels ***

Clean Lawn Mower ****

Clean under Drive Cover ***

Check Drive Belt / Pulleys ***

Check / Sharpen / Replace Blade

Lubrication

Clean and Recharge Battery **

Check Engine Oil level

Change Engine Oil

Clean Air Filter

Inspect Muffler

Replace Spark Plug

Replace Air Filter Paper Cartridge

Empty fuel system or add Stabilizer

BEFORE

EACH

USE

AFTER

EACH

USE

EVERY

10

HOURS

EVERY

25 HOURS

OR SEASON

EVERY

100

HOURS

BEFORE

STORAGE

1

 - Change more often if operating under a heavy load or in high outdoor temperatures.

2

 - Service more often if operating in dirty or dusty conditions.

3

 - Replace blades more often when mowing in sandy soil.

4

 - Charge 48 hours at end of season.

5

 - And after each 5 hours of use.

(if so equipped)

Electric-Start mowers
Power-Propelled mowers
Use a scraper
to clean under deck

*

**

***

****

15

OPERATION

18" (45cm) HI-VAC MODELS:

Your lawn mower was shipped ready to 

be used as a mulcher.  To convert to rear 

bagging or side discharging:
REAR BAGGING 

1.  Remove knob securing mulcher door 

to lawn mower housing.

2.  Open mulcher door and position dis-

charge chute over both threaded studs.

3.  Secure discharge chute to lawn 

mower housing with both knobs.

4.  Place the grass catcher on the rear 

door as shown.

NOTE:

 Be sure the grass catcher is se-

curely locked in place.

•  Mower is now ready for rear bagging 

operation.

SIDE DISCHARGING

1.  Discharge chute must be removed.

2.  Open mulcher door and install side dis-

 charge deflector beneath it as shown.

Mulcher 

door

Knob

Threaded stud

Side discharge deflector

Dis-

charge 

chute

Grass catcher

Knobs

Threaded stud

Mulcher 

door

Rear door

SIMPLE STEPS TO REMEMBER

WHEN CONVERTING YOUR

“MULTI-CUT” LAWN MOWER:

FOR MULCHING -

•  Rear mulcher plate or plug (if equipped) 

installed and rear door closed.

•  Mulcher door closed.
FOR REAR BAGGING -

•  Rear mulcher plate or plug (if equipped) 

removed.

•  Grass catcher installed.

•  Mulcher door closed.
FOR SIDE DISCHARGING -

•  Rear mulcher plate or plug (if equipped) 

installed and rear door closed.

•  Discharge deflector installed.

 

CAUTION: 

 Do not run your lawn 

mower without rear mulcher plate or plug 

in place or approved grass catcher in 

place.  Never at tempt to op er ate the lawn 

mow er with the rear door re moved or 

propped open.

TO EMPTY GRASS CATCHER (REAR 

DISCHARGE AND MULTI-CUT MODELS)

•  Simply open rear door and lift grass 

catcher up and away from mower.

NOTE:

  Do not drag the bag when 

emptying.  It will cause unnecessary wear.

 

CAUTION: 

 Under nor mal usage, the 

catch er material is subject to de te ri o ra tion 

and wear and should, therefore, be 

checked frequently for replacement.  Any 

replacement catcher should be checked 

to ensure compliance with original 

man u fac tur er's spec i fi ca tions.

 

CAUTION: 

 Do not run lawn mower 

with out the rear door, ap proved grass 

catcher or clip ping de flec tor in place.  

Never at tempt to op er ate mower with the 

rear door removed or propped open.

Grass 

catcher 

frame 

handle

Bag handle

(if equipped)

Содержание PR725Y22RHP



















Отзывы: