background image

MACHINE´S SAFETY EQUIPMENT

8 – English

General

This section describes the machine

s safety equipment, 

its purpose, and how checks and maintenance should be 
carried out to ensure that it operates correctly.

Engine brake handle

The engine brake is designed to stop the engine. When 
the grip on the engine brake handle is released the engine 
should stop.

Checking the engine brake handle

Start the engine and then release the brake handle. 
The engine should stop and the drive should 
disengage.

Rear deflector

The rear deflector, attached between the rear wheels of 
your mower, is provided to minimize the possibility that 
objects will be thrown out of the rear of the mower into the 
operator’s mowing position.

Inspecting the rear deflector

Make sure the rear deflector is not damaged and that 
there are no visible defects such as cracks, or broken 
springs that force the door closed. Replace the 
deflector or springs if damaged.

Muffler

The muffler is designed to keep noise levels to a minimum 
and to direct exhaust fumes away from the user.

Inspecting the muffler

Check regularly that the muffler is complete and 
secured correctly.

!

WARNING! Never use a machine that has 
faulty safety equipment! If your machine 
fails any checks contact your service 
agent to get it repaired.

Prevent unintentional starting by 
removing the ignition cable from the 
spark plug.

IMPORTANT! Federal regulations require an engine 
control to be installed on this lawn mower in order to 
minimize the risk of blade contact injury. Do not under 
any circumstances attempt to defeat the function of the 
operator control. The blade turns when the engine is 
running.

!

WARNING! Never use a machine without 
a muffler, or with a faulty muffler. A 
damaged muffler may substantially 
increase the noise level and the fire 
hazard. Keep fire fighting equipment 
handy.

The muffler gets very hot during and 
after use. This also applies during idling. 
Be aware of the fire hazard, especially 
when working near flammable 
substances and/or vapours.

Содержание PR625AWD





























Отзывы: