Poulan Pro PR625AWD Скачать руководство пользователя страница 12

FUEL HANDLING

12 – English

General

Fueling

Use fresh, clean, regular unleaded gasoline with a 
minimum of 87 octane. Do not mix oil with gasoline. 
Purchase fuel in quantities that can be used within 30 
days to assure fuel freshness

Never start the machine:

If you have spilled fuel or engine oil on the machine, 
wipe off the spillage and allow remaining fuel to 
evaporate.

If you have spilled fuel on yourself or your clothes, 
change your clothes. Wash any part of your body that 
has come in contact with fuel. Use soap and water.

If the machine is leaking fuel. Check regularly for 
leaks from the fuel cap and fuel lines.

Engine oil

See instructions in the section "Maintenance".

The engine oil should be changed the first time after 5 
hours running time. Never use oil intended for two-
stroke engines.

Transport and storage

Store and transport the machine and fuel so that there 
is no risk of any leakage or fumes coming into contact 
with sparks or open flames, for example, from 
electrical machinery, electric motors, electrical relays/
switches or boilers.

When storing and transporting fuel always use 
approved containers intended for this purpose.

Long-term storage

When storing the machine for long periods the fuel 
tank must be emptied. Contact your local gas station 
to find out where to dispose of excess fuel.

Fuel stabilizer is an acceptable alternative to avoid 
tacky deposits during storage. Add stabilizer to the 
fuel in the tank or the storage container. Always follow 
the mix ratio found on stabilizer container. Run the 
engine for at least 10 minutes after adding the 
stabilizer so that it will reach the carburetor. Do not 
empty the gas tank and carburetor if using fuel 
stabilizer.

!

WARNING! Running an engine in a 
confined or badly ventilated area can 
result in death due to asphyxiation or 
carbon monoxide poisoning.

Fuel and fuel fumes are highly flammable 
and can cause serious injury when 
inhaled or allowed to come in contact 
with the skin. For this reason observe 
caution when handling fuel and make 
sure there is adequate ventilation.

The exhaust fumes from the engine are 
hot and may contain sparks which can 
start a fire. Never start the machine 
indoors or near combustible material!

Do not smoke and do not place any hot 
objects in the vicinity of fuel.

!

WARNING! Always stop the engine and let 
it cool for a few minutes before refueling. 
The engine should be switched off.

Use a fuel can at all times to avoid 
spillage.

Fill fuel tank to bottom of tank filler neck. 
Do not overfill. Use fresh, clean, regular 
unleaded gasoline with a minimum of 87 
octane. Do not mix oil with gasoline. 
Purchase fuel in quantities that can be 
used within 30 days to assure fuel 
freshness.

When refuelling, open the fuel cap slowly 
so that any excess pressure is released 
gently.

Clean the area around the fuel cap.

Tighten the fuel cap carefully after 
refueling. Negligence may lead to the 
start of a fire.

CAUTION! Check the oil level before starting the lawn 
mower. A too low oil level can cause serious damage to 
the engine.

CAUTION! Alcohol blended fuels (called gasohol or 
using ethanol or methanol) can attract moisture which 
leads to separation and formation of acids during 
storage.
Acidic gas can damage the fuel system of an engine 
while in storage. To avoid engine problems, the fuel 
system should be emptied before stor age of 30 days or 
longer. Empty the gas tank, start the engine and let it run 
until the fuel lines and carburetor are empty. Use fresh 
fuel next season. Never use engine or carburetor 
cleaner products in the fuel tank or permanent damage 
may occur.

Содержание PR625AWD





























Отзывы: