Poulan Pro PR174Y22RHPE, Руководство оператора

Страница: 7 / 16

3. Remove all package materials. 4. Remove the product from the carton and make
sure no loose parts are left in the carton.
To set the product in operation position
1. Lift the lower handle section to operation
position.
2. Install the supplied carriage bolts in the handle
and through the handle brackets.
3. Lift the upper handle section into position on the
lower handle. Tighten the two knobs.
4. Discard all remaining package material from the
motor control handle.
To install the electric start module
1. Loosen the wing screw.
2. Fully retract the wing screw into the start module
housing. The screw is a part of the housing and
cannot be removed.
3. Put the starter module above the upper handle
tube and line up the mounting hole for the wing
screw.
4. Push the wing screw through the mounting hole.
5. Tighten the wing screw against the start module
housing.
6. Connect the wire harness from the mower to the
pigtail on the electric start module tightly.
Note: Make sure the ratcheting lock feature on the
wing screw is engaged to prevent the screw from
loosening during operation.
To install the starter rope handle
1. Loosen the T-knob.
2. Hold the operator presence control bar against
the upper handle.
3. Hold the starter rope handle. Slowly pull until the
starter rope can move into the loop of the rope
guide.
4. Tighten the T-knob.
To assemble the grass catcher
1. Attach the grass catcher frame to the grass bag
with the rigid part of the bag on the bottom. Keep
the handle of the frame out of the top of the bag.
10
2. Attach the grass bag to the frame with the quick-
action clips.
438 - 001 - 29.11.2017 7