Poulan Pro PR1742STC Скачать руководство пользователя | Manualshive

Страница: 17 / 48

background image

17

CUSTOMER RESPONSIBILITIES

CLEANING

•

Clean engine, battery, seat, finish, etc. of all foreign
matter.

•

Keep finished surfaces and wheels free of all gasoline,
oil, etc.

•

Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose to clean your
tractor unless the electrical system, muffler, air filter and
carburetor are covered to keep water out. Water in engine
can result in a shortened engine life.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if
equipped) as it could create a fire hazard and/or damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing
season or after every 100 hours of use, whichever comes
first. Spark plug type and gap setting is shown in "PROD-
UCT SPECIFICATIONS" section of this manual.

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil
change if the tractor is used more than 100 hours in one year.

IN-LINE FUEL FILTER (See Fig. 17)

The fuel filter should be replaced once each season. If fuel
filter becomes clogged, obstructing fuel flow to carburetor,
replacement is required.
•

With engine cool, remove filter and plug fuel line sec-
tions.

•

Place new fuel filter in position in fuel line with arrow
pointing towards carburetor.

•

Be sure there are no fuel line leaks and clamps are
properly positioned.

•

Immediately wipe up any spilled gasoline.

FIG. 17

FUEL
FILTER

CLAMP

CLAMP

FOAM
PRE-CLEANER

COVER
KNOB

COVER

CARTRIDGE
NUT

FIG. 16

PAPER
CARTRIDGE

BASE

AIR FILTER (See Fig. 16)

Your engine will not run properly using a dirty air filter. Clean
the foam pre-cleaner after every 25 hours of operation or
every season. Service paper cartridge every 100 hours of
operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.
•

Remove knob(s) and cover.

TO SERVICE PRE-CLEANER
•

Slide foam pre-cleaner off cartridge.

•

Wash it in liquid detergent and water.

•

Squeeze it dry in a clean cloth.

•

Saturate it in engine oil. Wrap it in clean, absorbent cloth
and squeeze to remove excess oil.

•

If very dirty or damaged, replace pre-cleaner.

•

Reinstall pre-cleaner over cartridge.

•

Reinstall cover and secure with knob(s).

TO SERVICE CARTRIDGE
•

Remove cartridge nut.

•

Carefully remove cartridge to prevent debris from enter-
ing carburetor. Clean base carefully to prevent debris
from entering carburetor.

•

Clean cartridge by tapping gently on flat surface. If very
dirty or damaged, replace cartridge.

•

Reinstall cartridge, nut, precleaner, cover and secure
with knob(s).

IMPORTANT: PETROLEUM SOLVENTS, SUCH AS
KEROSENE, ARE NOT TO BE USED TO CLEAN THE
CARTRIDGE. THEY MAY CAUSE DETERIORATION OF
THE CARTRIDGE. DO NOT OIL CARTRIDGE. DO NOT
USE PRESSURIZED AIR TO CLEAN OR DRY CARTRIDGE.

«
...
15
16
17
18
19
...
»

Содержание PR1742STC

















































Отзывы:

Нет отзывов

Похожие инструкции для PR1742STC

Бренд: Dixie Chopper Страницы: 52

Бренд: Yazoo Страницы: 9

Бренд: Ariens Страницы: 32

Бренд: Gtech Страницы: 68

Бренд: Sentinel Страницы: 40

Tri King 1900 Series

Бренд: Jacobsen Страницы: 30

Бренд: Woods Страницы: 28

Бренд: Lawn-Boy Страницы: 28

Бренд: Bad Boy Страницы: 36

Бренд: Kubota Страницы: 45

Бренд: Sabo Страницы: 99

Бренд: Sabo Страницы: 114

Бренд: Toro Страницы: 20

Бренд: Toro Страницы: 24

Бренд: Toro Страницы: 32

Wheel Horse 5xi

Бренд: Toro Страницы: 8

Wheel Horse XT Series

Бренд: Toro Страницы: 20

Бренд: Toro Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды