Poulan Pro PPB4020M, Инструкция по эксплуатации

Страница: 8 / 66

7
ASSEMBLY
UNPACKING
• Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
• Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the product.
• If any parts are damaged or missing, please
call 1-855-378-6903 for assistance.
PACKING LIST
• 40V 20” Dual Blade Mower
• Mulching Plug
• Grass Catcher Bag
• 40V 2Ah Battery (PPB402AH)
• 40V 4Ah Battery (PPB404AH)
• 40V Charger
• Owner’s Manual
WARNING:
If any parts are damaged
or missing do not operate this product until
the parts are replaced. Using a product with
damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify
this product or create accessories not
recommended for use with this product. Any
such alteration or modification is misuse and
could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
Do not insert battery
until assembly is complete and you are
ready to mow. Failure to comply could result
in accidental starting and possible serious
personal injury.
WARNING:
To prevent accidental
starting that could cause serious personal
injury, always remove the battery pack from
the product when assembling parts.
WARNING:
Never operate the mower
without the proper safety devices in place
and working. Never operate the mower with
damaged safety devices. Operation of this
product with damaged or missing parts could
result in serious personal injury.
UNFOLDING AND ADJUSTING
HANDLE ASSEMBLY
RAISING THE HANDLE ASSEMBLY
• Open the lower handle locks (1).
• Pull up and back on the lower handle until it
is aligned with the slot between the handle
locks and the mower housing.
NOTE: If the lower handle is difficult to move,
turn the lower handle locks counterclockwise
to free the handle.
• To secure the lower handle in place, close
the lower handle locks.
NOTE: If the lower handle is loose or does
not seat completely in the slot, turn the lower
handle locks clockwise to secure the handle.
• Open the upper handle locks (2).
• Pull up and back on the upper handle to
raise it into operating position. Make sure
that the lower handle is seated in the
grooves at the bottom of the upper handle.
• To secure the upper handle in place, close
the upper handle locks.
NOTE: If the upper handle is loose or
separated from the lower handle, tighten the
knobs on the upper handle locks by turning
them clockwise.
LOWERING THE HANDLE ASSEMBLY
• Open the upper handle locks
.
NOTE: If the handle lock is difficult to open,
loosen the knobs on the upper handle locks
by turning them counterclockwise.
• Lower the upper handle.
• Open the lower handle lock (1).
• Push outward on each side of the lower
handle (2) until it is free from the slot. Then,
fold the handle to the front of the unit. Avoid
pinching or trapping any cables.
1
2
Open
Close
Open
Close