background image

20

neglect, improper maintenance, unapproved

modifications, or the use of parts not made or

approved by the original equipment

manufacturer. You are responsible for pres-

enting your small off--road engine to a Poulan

PRO authorized repair center as soon as a

problem exists. Warranty repairs should be

completed in a reasonable amount of time,

not to exceed 30 days. If you have any ques-

tions regarding your warranty rights and re-

sponsibilities, you should contact your near-

est authorized service center or call Poulan

PRO at 1--800--554--6723.

WARRANTY

COMMENCEMENT DATE:

The warranty

period begins on the date the small off--road

engine is purchased.

LENGTH OF COVER-

AGE:

This warranty shall be for a period of

two years from the initial date of purchase.

WHAT IS COVERED: REPAIR OR RE-

PLACEMENT OF PARTS.

Repair or re-

placement of any warranted part will be per-

formed at no charge to the owner at an

approved Poulan PRO servicing center. If

you have any questions regarding your war-

ranty rights and responsibilities, you should

contact your nearest authorized service

center

or

call

Poulan

PRO

at

1--800--554--6723.

WARRANTY PERIOD:

Any warranted part which is not scheduled

for replacement as required maintenance, or

which is scheduled only for regular inspec-

tion to the effect of “repair or replace as nec-

essary” shall be warranted for 2 years. Any

warranted part which is scheduled for re-

placement as required maintenance shall be

warranted for the period of time up to the first

scheduled replacement point for that part.

DIAGNOSIS:

The owner shall not be

charged for diagnostic labor which leads to

the determination that a warranted part is de-

fective if the diagnostic work is performed at

an approved Poulan PRO servicing center.

CONSEQUENTIAL DAMAGES:

Poulan

PRO may be liable for damages to other en-

gine components caused by the failure of a

warranted part still under warranty.

WHAT IS

NOT COVERED

: All failures caused by

abuse, neglect, or improper maintenance

are not covered.

ADD--ON OR MODIFIED

PARTS:

The use of add--on or modified parts

can be grounds for disallowing a warranty

claim. Poulan PRO is not liable to cover fail-

ures of warranted parts caused by the use of

add--on or modified parts.

HOW TO FILE A

CLAIM:

If you have any questions regarding

your warranty rights and responsibilities,

you should contact your nearest authorized

service center or call Poulan PRO at

1--800--554--6723.

WHERE TO GET WAR-

RANTY SERVICE:

Warranty services or re-

pairs shall be provided at all Poulan PRO

service centers. Call: 1--800--554--6723

MAINTENANCE, REPLACEMENT AND

REPAIR OF EMISSION RELATED PARTS

:

Any Poulan PRO approved replacement

part used in the performance of any warranty

maintenance or repair on emission related

parts will be provided without charge to the

owner if the part is under warranty.

EMIS-

SION CONTROL WARRANTY PARTS

LIST:

Carburetor, ignition system: spark plug

(covered up to maintenance schedule), igni-

tion module, muffler including catalyst (if

equipped), fuel tank (California only).

MAIN-

TENANCE STATEMENT:

The owner is re-

sponsible for the performance of all required

maintenance as defined in the instruction

manual.

The information on the product label indicates which standard your engine is certified.

Example: (Year) EPA Phase 1 or Phase 2 and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

Содержание PP3516AVX





















Отзывы: