Page 4 of 4
5. The file bars attached inside the drawer case in legal sized.
If it use for letter sized files, release the screws pre-attached on the drawer box to remove the metal holders.
Place the metal holders to other pre-drilled holes provided and insert the screws into the hole, then tighten with
screwdriver as shown in
fig. 5, illustration. 4 & 5
.
Illustration. 4
Fig. 5
Illustration. 5
6. If the floor is uneven adjust the recessed levelers found on the bottom of the furniture.
Carefully grasp one side of the furniture and elevate it slightly to provide access to levelers.
Turn the leveler until adequate contact will be made with the floor.
Carefully set the furniture down.
Repeat until the furniture sits level and stable.
Illustration. 6
Fig. 6
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
Thank you for your purchase
Stores | catalog | www.potterybarn.com
