Page
4
/
4
8. Attach a Support Leg (E) to each Slat (D). Rotate the Support Leg (E) clockwise to tighten, as seen in the
illustration below.
Note: Do not over tighten
9. Place the 5 assembled Slats (D+E) onto the notches found on Siderails (C1 & C2), as seen in the illustrstion
below.
10. Secure the Slats with 10 Wood Screws (I) using a Philips Head Screwdriver.
Note: Do not over tighten
11. If needed, adjust the levelers underneath the posts of the Headboard (A), Footboard (B), and Support Legs (E).
12. Assembly is complete.
Care Instructions:
Dust often using a clean, soft, dry, and lint-free cloth.
Blot spills immediately and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarn.com
