Page
3
/
4
Assembly Instruction Steps:
1. Attach Headboard (A) to Side Rail (C1) by aligning the pre-drilled holes on the Headboard (A) with the wooden
dowels of Side Rail (C1).
2. Secure using a Half Moon Washer (K), Flat Washer (G), Lock Washer (H), and a Hex Nut (J), as seen in the
ilustraton below.
3. Tighten with the supplied Allen Wrench (L).
4. Follow steps 1 and 2 to complete the other Side Rail (C2).
5. Attach Footboard (B) to the ends of the Side Rails (C1, C2) by aligning the pre-drilled holes of the Footboard (B)
with the wooden dowels on the Side Rails (C1, C2).
6. Secure using 4 sets of: Half Moon Washer (K), Flat Washer (G), Lock Washer (H), and Hex Nut (J), as seen in
the illustration below.
7. Tighten the hardware with the supplied Allen Wrench (L).
