the provided Allen wrench (the one you kept handy) to tighten the same set screws you just
loosened so that each wall bracket becomes secured to the wall-mounted plates. Make sure that
the brackets are firmly attached to the plates before releasing hold of the mirror.
G)
The friction of the pivoting mirror can be controlled by tightening and loosening the set screws
located at the bottom of each knuckle (where the mirror pivots). This will allow the pivoting mirror
to hold a particular viewing angle. Note: the friction-adjustment set screws are NOT the set
screws used to secure the brackets to the wall in Step (F).
Care Instructions:
Wipe with a soft, dry cloth. Do not use any strong abrasive or solvent-based household cleaners.
A household glass cleaner may be used for the mirror surfaces, but spray the cleaner onto a clean cloth
first and then use the cloth to wipe the glass
– do not spray the cleaner directly onto the glass or frame
surfaces
WALL
