2/5
Assembly Instructions:
1.
Carefully place the tabletop (A) upside down on a carpeted or scratch-free work surface. (Fig. 1)
2.
Attach one leg (C) to the tabletop (A). Insert a lock washer (E) and a flat washer (D) into each Allen bolt (F). Insert
(2) Allen bolts with washers through the pre-drilled holes on the apron and into the leg. Use hand to screw half way
then use the Allen key (G) to continue tightening. DO NOT FULLY TIGHTEN AT THIS TIME. (Fig. 1)
Tighten
Loosen
A
C
3.
Attach the pre-attached bolt on the lower part of the leg into the pre-drilled hole of the shelf (B). (Fig. 2)
A
B
C
Loosen Tighten
Fig. 1
Fig. 2
