Potter UDACT-9100, Инструкция по установке и эксплуатации, Страница: 20 / 36

Configuration & LCD Operation
16
6. Set Time (Command-Menu)
Command Menu/Set Time
1. Daylight saving time
[X] DISABLE ->Default
[ ] ENABLE
Use this function to enable
daylight savings time.
Command Menu/Time Clock
2. Set time and date
Default
00:00 MON 2000-01-01
Use this function to set the
time and date. Use the
“LEFT” and “RIGHT” keys to
move the cursor to the
desired location in the
display and use the “UP”
and “DOWN” keys to
increase or decrease the
values. Press the “ENTER”
key to accept the changes
and the “CANCEL” key to
ignore the changes
.
Note:
time is in 24hr format
Command Menu/Time Clock
3. Compensation
Once the compensation value is entered the
display will be:
Compensation value can
range from -15 to +15
seconds.
Use the up down arrow keys
to select daily compensation
value and press ENTER.
For a fast clock adjust
negatively. For a slow clock
adjust positively. For
example: for a clock which
runs 5 minutes a month
(based on 30 days) fast
select -10 seconds.
1 D a y l i g h t S a v e
2 T i m e C l o c k
3 C o m p e n s a t i o n
D a y l i g h t S a v i n g
[ X ] D I S A B L E
H H : M M W K D Y Y Y Y - M M - D D
0 0 : 0 0 M O N 2 0 0 0 - 0 1 - 0 1
D a i l y C o m p e n s a t i o n :
0
D a i l y C o m p e n s a t i o n :
P a n e l C o n f i g U p d a t e d
firealarmresources.com