Potter PSN 1000(E), Руководство по установке

Страница: 15 / 15

PSN-1000 POWER EXPANDER-5403599-REV C-04/17
15
SLC#____ Current Draw Worksheet (Repeat for each SLCE-127 being powered by the PSN-1000)
Description Qty
Standby
(mA)
Total
Standby (mA)
Alarm
(mA)
Total
Alarm (mA)
SLCE-127 Main Board 1 60 60 60 60
Analog photo smoke detector (PSA) 0.325 0.325
Analog photo DUCT smoke detector (DSA) 0.325 0.325
Analog photo smoke / fixed heat detector (PSHA) 0.325 0.325
Analog fixed heat detector (FHA) 0.325 0.325
Analog combo heat detector (RHA) 0.325 0.325
Conventional initiating zone module - 4 inch mount (CIZM-4) *Note 1 0.325 1.0
Miniature contact module (MCM) 0.325 0.325
Single contact module - 4 inch mount (SCM-4) 0.325 1.0
Dual contact module - 4 inch mount (DCM-4) 0.325 1.0
Monitored output module - 4 inch mount (MOM-4) *Note 2 0.325 1.0
Twin relay module - 4 inch mount (TRM-4) 0.325 1.0
Short circuit isolator (SCI) *Note 3 0.325 2.34
Analog sounder base (ASB) 0.325 0.325
Analog relay base (ARB) 0.325 0.325
Isolator base (AIB) *Note 3 0.325 2.34
SLC alarm LED Current n/a n/a n/a 27.0
SLC Standby
Current
SLC Alarm
Current
* Note 1: CIZM requires 24VDC power source. Standby current Style D = 4.90 ma, Style B (8.5 ma). Alarm Current = 50.0 ma
* Note 2: MOM requires 24VDC power source. Standby current = 1.6 ma. Alarm Current = 1.60 ma
* Note 3: In Class B (Style 4) installations the following rule must be observed:
Number of SLC Devices
+ Number of Isolated branches * 8
Must be <= 127
* Note 4: In Class A (Style 7) installations the following rule must be observed:
Number of SLC Devices
+ Number of Isolators used
Must be <= 127