8830221 - REV A
•
10/22
PAGE 2 OF 2
Potter Electric Signal Company, LLC • St. Louis, MO • Phone: 800-325-3936 • www.pottersignal.com
PAD300-SB
Addressable Sounder Base
Model
Description
Stock No.
PAD300-SB
Addressable Sounder Base
3992785
Ordering Information
Detector Base Mounting
Locking Feature
PAD300-SB should be mounted directly on the electrical box. The
mounting holes are configured for a single gang, 3-1/2” octagon,
3-1/2” square, double gang, 4” octagon, 4” square, 50mm c/c, 60mm
c/c and 70mm c/c boxes. See Fig. 1
Eliminate the Locking Feature
PAD300-SB include a locking feature that prevents removal of the
detector and removal of the base cover without using a tool.
1. To enable this feature, break off the locking tab and then install the
detector. See Fig. 2.
Removing of Detector Head from Base
2. To remove the detector from the base once the locking feature has
been activated, insert a small screwdriver into the slot on the base to
push the plastic tab while simultaneously turning the detector head
counter-clockwise. See Fig. 3.
3. To remove the base cover from the lower enclosure once the locking
feature has been activated, insert a small screwdriver into the slot
on the base to push the plastic tab while simultaneously turning the
detector head counter-clockwise.
Using the included screw,
attach the detector base to
detector bracket.
Mount the detector
bracket to the back box
using the mounting
screws.
Break off tab (gray area)
in image to enable locking
feature.
Insert small screwdriver
into slot to remove
detector from base.
Alignment Features
Fig. 1
Fig. 2
Fig. 3
Mounting Screws
