8830104 - REV B
•
12/17
PAGE 2 OF 2
PAD100-SB
Addressable Sounder Base
Model
Description
Stock No.
PAD100-SB
Addressable Sounder Base
3992729
Ordering Information
Detector Base Mounting
Locking Feature
PAD100-SB should be mounted directly on the electrical box. The
mounting holes are configured for a single gang, double gang, octagon
or 4” square box. See Fig. 1.
Eliminate the Locking Feature
PAD100-SB include a locking feature that prevents removal of the
detector and removal of the base cover without using a tool.
1. To eliminate this feature, break off the locking tab and then install
the detector. See Fig. 2.
Removing of Detector Head from Base
2. To remove the detector from the base once the locking feature has
been activated, insert a small screwdriver into the slot on the base to
push the plastic tab while simultaneously turning the detector head
counter-clockwise. See Fig. 3.
3. To remove the base cover from the lower enclosure once the locking
feature has been activated, insert a small screwdriver into the slot on
the on the base to push the plastic tab while simultaneously turning the
detector head counter-clockwise.
Using the two included
screws, attached the
detector base to detector
bracket.
Mount the detector
bracket to the back box
using the mounting
screws.
Break off tab (gray
area) in image to disable
locking feature.
Insert small screwdriver
into slot to remove
detector from base.
Alignment Features
Fig. 1
Fig. 2
Fig. 3
DWG • 516-
933-4900 • dwgdistribution.com
