6
PRM-902F / 102F
①
--
STANDBY
: Press for a second to turn on the power and the indicator is on. Press again to turn
off the power.
②
--
F1/F2
: User-preferred functions are saved on the F1 & F2. The settings for the
functions are managed under System Menu.
③
--
WAVE / VECTOR
: To display Waveform or Vector Scope. The mode is switched on in the
following order: Waveform -> WFM Parade -> Vector ->WFM / VS ->
WFM Parade / VS -> Wide WFM -> Full WFM -> Full VS -> OFF.
④
--
R/G/B/GRAY
: To display the pictures in either Red or Green or Blue or Gray(only the
Luminance is displayed). The mode is switched in the following order: Red ->
Green -> Blue -> Gray -> Off.
⑤
--
MARKER
: To activate or deactivate the settings of Marker.
⑥
--
SCAN
: To select the display mode of Scan screen.
The display modes are Zero Scan, Under Scan, Over Scan and Zoom Scan.
⑦
--
HDMI
: To select HDIM input.
⑧
--
ENTER
: To select the categories under OSD MENU.
⑨
--
VIDEO Attribute
: To open the setting menu for Brightness, Contrast, Chroma, Volume
and Audio.
⑩
--
AUDIO LEVEL
: To activate Audio Level Meter.
⑪
--
H/V DELAY
: To check the data carried outside the active range of the input signal.
The delay modes are H Delay, V Delay, H/V Delay and Off.
⑫
--
ASPECT
: To change the size of the screen to 16:9 or to Native Ratio when Analog
(Composite, Component, S-Video), HDMI (SD), SD-SDI (NTSC / PAL), 2Ksf or 2Kp
format is in. This function doesn’t work under the following conditions: 1)
When HD-SDI and HDMI of 1080p, 720p is 16:9 source. 2) Under DVI and VGA channel.
⑬
--
ANALOG
: To select a desired Analog input.
The inputs are switched in the following order: CVBS1 -> CVBS2 -> CVBS3 ->
SVIDEO -> RGB ->YPbPr -> VGA. OSD LOGO window appears at the top left.
⑭
--
SDI-A/B
: To select SDI chA or chB input and a separate OSD LOGO
window appears.
⑮
--
MENU
: To activate OSD Menu.
Controls and Functions