9
6. Operating the Scanner
The scanner can read barcodes in either omnidirectional or single-line
mode to accommodate different requirements. This scanner is truly
omnidirectional while single-line mode is usually used for better aiming on
the specific barcode on the same sheet of more than one barcode printed
closely.
6-1. Function Button
Press down the Function Button on top of the scanner as shown below
to switch between omnidirectional scanning and single-line scanning
modes.
¾
If the scanner is powered off and re-turned on, even the
function button is pushed down before it’s turned off, the
scanner stays as factory default (omnidirectional scanning).
Hence, in order to have single-line scanning, the function
button has to be pressed up and pressed down again.
1) Presentation Mode:
As if the scanner is on the stand, the scanner will always stay active in
Presentation Mode. In other words, no matter if the Function Button LED
light is on or off, the scanner stays in the Presentation Mode.
Function Button