Positron Teleline 750003, Описание и установка

Страница: 23 / 34

23
Chassis Mounting
³
To install the Wall-Mount Chassis:
1. Verify that you have the following customer-provided tools and hardware
required to install the Chassis:
Q
Phillips screwdriver
Q
2 cm (3/4”) or 2.5 cm (1") thick plywood backboard and appropriate
mounting hardware
Q
Cable clamps and mounting hardware for routing cables exterior to the
shelf (quantity determined by the cable lengths).
Q
Black and Red wires, stranded, #18-#14 AWG (lengths determined by
number of Chassis and distance to equipment to be powered)
2. Unpack the Wall-Mount Chassis Model 750003 and its hardware from its box.
3. To mount the Chassis, install the plywood backboard on the wall to provide a
secure mounting surface.
4. Place the Chassis in the desired location and orientation on the backboard
and mark the location of the four mounting holes.
5. Mount the Chassis using the screws supplied in the kit.
6. If other Chassis are used to provide redundant power supplies, increased
power output or battery backup, repeat the above steps for the other Chassis.