Positron G-1212, Руководство пользователя

Страница: 63 / 157

Positron Telecommunication Systems Inc. – G-Series
63
Reset to Defaults
Clicking this tab resets the system to its default mode using the last applied
firmware.
This operation will disconnect all current calls and should not
be done during operating hours.
It is highly recommended that a backup is taken of current
configuration files as they must be restored following the
restart.
The Web Interface will not be available until the system has
been reset. Its IP address will be reset to 192.168.1.2 and
the password will return to its default. A configuration file
saved before the reset will have to be restored in
Maintenance -> Backups
➘
To reset the system
•
Following a configuration backup, choose System ->
Restart.
•
A confirmation dialog box will allow the reset to be cancelled.
Figure 36 Reset to Factory Settings confirmation dialog
•
Click OK to restart the system.
•
A message will be displayed indicating a 100-second wait.
The system will be reset when the unit’s green LED lights
continuously.
•
Enter the web interface default address of
192.168.1.2
in
the browser as well as the default system password as
indicated in the Login section on page 43