Positron FS-GIGA, Быстрое руководство по установке

Страница: 5 / 29

FS-GIGA Quick Installation Guide
Positron Access Solutions 5 Document 180-0147-001 R02
1.1 Introduction
Positron Access Solutions’ next generation FS-GIGA FlexStream Remote Unit
(RU) enables the transport of high quality, ultra-high bandwidth Carrier Ethernet
business services and Metro/Macro Mobile backhaul services over bonded
copper pairs. The FS-GIGA is compliant with the MEF CE 2.0 specification and
provides up to 800 Mbps of bandwidth on 8 bonded VDSL2 pair with vectoring
and 1 Gbps on Ethernet (Electrical and Optical). The hardened unit is fully
compliant to VDSL2/ADLS2+ standards, supporting multi-channel PTM bonding
and standards based vectoring.
Note: Read Chapter 5 Safety and Warnings before proceeding.
1.2 Installation
1.2.1 FS-GIGA Series Remote Unit Connections
Remote Unit Power Connection
The FS-GIGA-04 and FS-GIGA-08 Remote Units (RU) require local -48Vdc
power. For a stand-alone power supply, see Chapter 7 for more information.
Ethernet Data Connections
Attach Ethernet data cables to any of the 4 10/100/1000BaseT ports on the front
panel or insert an SFP module in the front panel SFP (3x) slot. Note: Ports 1-2
are combo ports, SFP or RJ-45 can be used.
Multi-Pair Span (xDSL) Connection
The Multi-Pair Span connectors are used to connect the FS-GIGA RU to the
outside plant pairs. The FS-GIGA-04 uses 2 RJ-11 connectors (each containing
2 pairs); the FS-GIGA-08 uses 4 RJ-11 connectors (each containing 2 pairs).