E320ZKE001
- 4 -
2.2 SW requirements
The operating systems of both computers must support HID (human
Interface Device).
3.0 Installation
There is not necessary to install any driver to operating system. After the
installation of the cables and power supply it is necessary to set the display
parameters in operating systems.
Intelligent KVM switch E320 does affect the operating systems in no
manner.
3.1 Cables
Each of the computer system has to be connected to the back switch panel
by two cables - DVI and USB.
The cables connect from graphic cards outputs with DVI inputs. Be careful
to connect the USB1 and DVI1 cables to the same computer. If the graphic
card output connector is HDMI type, it is necessary to use HDMI -> DVI
cable instead of DVI -> DVI one.
