Positron 3782101C/50, Руководство пользователя

Страница: 40 / 74

Using the Composite Railway-Insulator Tester & Software
34
Ensuring that the Insulator Tester has been switched ON ,
select Connect to Probe and reconnect to the same COM
port noted in the communications check performed prior to
going out in the field for a scanning session.
Select the appropriate COM Port, and Select ON.
Use the Send Alert to Probe button in the field to check the communication link. The Probe will
respond with an annunciating tone.
With communication confirmed, the Insulator Tester Operator can now proceed. Once in
position, the Insulator Tester Operator should press the Insulator Tester’s button to ensure it is
in
Awake Mode . If not, the Tablet Operator will be unable to signal the Insulator Tester. Ensure
that the LED of the Probe is flashing GREEN.
After 8 minutes of no communication, the Insulator Tester will go into Sleep mode. The Tablet
Operator can keep the Insulator Tester awake by sending a download request or by pressing the
Send Alert to probe button in the Windows based Insulator Tester Software interface.