6
In general, XT-3815/3915/3915IR will be set up beforehand in
Flat Folded
mode and then packaged into the box for shipping. After it is unpacked, you
may re-adjust the terminal in either
Low Profile
mode or
Full Extended
mode
according to your situation. Below will provide instructions on how to adjust
the specific base connected to the POS system. As a reminder, please be
careful not to touch the LCD panel while setting up the tilt angle.
XT-3815/3915/3915IR with Gen 7E Base
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-3815/3915/3915IR
with Gen 7E base.
1.
Unpack XT-3815/3915/3915IR, which is
supposed to be set in flat folded mode, out of
the package box and then lay your POS
system on a flat surface.
2.
Steady the base with one hand, and then tilt
the screen downwards.
3.
Position your terminal in
Full Extended mode
3.1
After grabbing the bottom edge of the screen with your hand, gently
move the screen upward until the screen is locked into place with a
click sound.
