Page 10
Automatic Power on Control
The system may also turn on according to some preset conditions such as
Modem Ring Up and Alarm Clock Wake Up or LAN Wake Up.
When the TX system is turned off after a successful boot up, the preset
automatic power on functions will keep monitoring for the preset conditions
and turn on the system when the preset conditions are met.
Please notice that if the TX system is improperly turned off before a complete
boot up procedure, the above preset power on control functions will be
disabled until next turning off after a complete boot up.
Storage Device
The standard system storage device is 2.5” SATA HDD in the main unit. This
device can be replaced with an option SATA SSD HDD.
TECHNICAL MANEUVERS
Some technical maneuver in TX-3000/TX-3000RS series such as serial COM
port +5V/+12V power supply settings is supported in system jumper setting
and printer parameter setting. However, such support is limited to the
application of specific Posiflex peripherals and must be disabled when the
Posiflex peripherals are disconnected.
Failure to follow the discipline would
result in electric or fire hazard and such consequences are not covered by
product warranty!
The rest applicable technical maneuvers include system CMOS data reset,
system reset, DRAM upgrades and installation of optional SATA SSD.
All
these technical maneuver operations require purchase of applicable Technical
Manual from Posiflex or consultation from Posiflex authorized dealers and
should be handled only by a
qualified technician
.
警告使用者
警告使用者
警告使用者
警告使用者
這是甲類的資訊產品，在居住的環
境 中使 用 時 ， 可 能會 造 成 射 頻干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454
