6
If you want to use a paper roll of 58mm
width, install the spacer plate in the
compartment of the printer, as shown in
the right figure, and then load the paper
roll of 58mm width into the partition at
the right side of the plate.
Next, set the paper width by using the PP-7600 software switch utility.
The software switch utility can be downloaded from the Posiflex’ global
website:
http://www.posiflex.com/en-global/Download/download
. To get more
detailed information on the paper width jumper setting, contact directly
the Posiflex’ technical service team.
5.
To avoid the paper cover not being
locked completely, push the central
portion of the paper cover to close.
Push
