Part 5
Please note the importance of keeping the leftward pressure on
bottom end of pole display during the process of turning the pole upright and
inserting the locating bosses
B’
or even when you want to release the locating
bosses
B’
away from I/O plate
B
and turn the upper end of pole display to left
to remove the locking lugs
A’
from bottom chassis
A
. Ignorance of this point
may damage or even break off the locking lugs
A’
due to improper torque
applied.
Apply sidewall screw
The screw bosses of PD-2601 base
should now align with the screw holes on
sidewall of system chassis. Only 1 screw
needs to be applied. Use the self-tapping
screw that comes wi th PD-2601 to fix from
external side of sidewall as demonstrated in
Pix. 6
.
Connect interface cable
Carefully close back the top cover of HT or PB system and connect
the interface cable of PD-2601 to appropriate port in system connector area.
Then close the back cover of the system.
INSTALLING PD-2602
Opening the rear connect cover on system
To install PD-2602 to the base of KS or TP systems, the rear connect
cover on its base has to be removed as described in
the user’s manual. The plastic
hook plate to remove the rear
connect cover in slim base is
indicated in
Pix. 7
and theat
for universal base is indicated
in
Pix. 8
.
A’
Pix. 5
B+B’
B+B’
Outside of sidewall
PD-2601 Base
Pix. 6
C+C’
Pix. 8
Pix. 7
